Mini A-10
Version: 1.0 (04.2026)
Project description
Wow… Here's a highly detailed mini version of the famous A-10 to build using lightweight filaments. This project is a collaboration with Joel Vlashof (VJM Aviation) and Wim Aubroeck and has been designed as either a single-seat or two-seat version. This aircraft is powered by just two 40 mm EDFs, which are easy to install… The flight characteristics of this mini-jet are simply breathtaking and scale-like.
-
Mini A-10 (250x250x250)
30,00 €inkl. 7 % MwSt.
Read more
General printing recommendations
| Printer size | 25 cm x 25 cm x 25 cm (e. g. Bambu Lab X1C) |
| Enclosure | Recommended for LW-ASA |
| Slicer | Bambu Studio (latest version) |
| Filaments used | LW-PLA, LW-ASA (e.g. colorFabb), PLA, PLA-CF (e.g. colorFabb) |
| Filament diameter | 1,75 mm |
| Nozzle diameter | 0,40 mm |
Special printing recommendations LW-ASA
Most of the components of the jets sold here are designed and optimized for stable, lightweight construction using LW-ASA. Since this foaming filament requires specific parameters for successful printing, which vary from printer to printer and slicer to slicer, you should conduct your own test prints beforehand. You can find many tutorials and tips on this topic online and on YouTube.
The basic default settings we use with a Bambu Lab X1C and Bambu Studio as slicers are listed here.
You can start with that for now.
| Print bed temperature | 90° Celsius |
| Nozzle temperature | 275° Celsius |
| Cooling | Off |
| Print speed | 35 mm/s |
| Layer height | 0,20 mm |
| Support | Tree-Support at 40° angles |
| Flow rate | 54% |
| Filling pattern | Gyroid (3D) |
| Filling level | 3% – 5% |
| Retract | Without |
| Number of outer layers | 1-2 |
| Printing plate adhesion | Brim, 5mm |