F-35A
Version: 1.0 (07.2025)
Project description
A printable version of what is probably the best-known fighter of the 5th generation is ready for you to replicate here and has been designed in cooperation with Joel Vlashof (VJM Aviation) In this A-version, special emphasis was placed on a very detailed execution of the entire jet with many scale details, which is currently unique.
The jet size was designed for either a 70 mm or 80 mm EDF.
-
F-35A (250x250x250)
98,00 €inkl. 7 % MwSt.
Add to cart
General printing recommendations
| Printer size | 25 cm x 25 cm x 25 cm (e. g. Bambu Lab X1C) |
| Enclosure | Not necessary |
| Slicer | Bambu Studio (latest version) |
| Filaments used | LW-PLA (e. g. colorFabb), PLA, PA-CF low-warp Nylon (e. g. colorFabb) |
| Filament diameter | 1,75 mm |
| Nozzle diameter | 0,40 mm |
Special printing recommendations for all LW-PLA components
Most components of the jets sold here are designed and optimized for a stable lightweight construction with LW-PLA. Since this foaming filament requires special parameters for successful printing, which vary from printer to printer and also from slicer to slicer, you should make your own printing tests in advance. You can find many tutorials and tips on the Internet and on YouTube.
The basic default settings we use with a Bambu Lab X1C and Bambu Studio as slicers are listed here.
You can start with that for now.
| Print bed temperature | 60° Celsius |
| Nozzle temperature | 242° Celsius |
| Cooling | Yes 100% |
| Print speed | 30 mm/s |
| Layer height | 0,20 mm |
| Support | Yes (Zickzack), for angles > 60° |
| Flow rate | 42% – 50% |
| Filling pattern | Gyroid (3D) |
| Filling level | 3% – 5% |
| Retract | Without |
| Number of outer layers | 1-2 |
| Printing plate adhesion | Brim, 8 lines |