Sea Harrier 105mm
Version: 1.0 (02.2026)
Project description
The holy grail in flight modelling and a long-time dream of the designers of this Sea Harrier can now become reality.
As functional as necessary and as close to the original as possible. This printable aircraft is based on more than 10 years of model-making experience and has been successfully tested as a Vertical Takeoff and Landing model. The jet uses a Pegasus ducting system with 4 swiveling nozzles, like the original, but can also be built as a simple, perfectly flying jet.
-
Sea Harrier 105mm (250x250x250)
98,00 €inkl. 7 % MwSt.
Add to cart
General printing recommendations LW-ASA
| Printer size | 25 cm x 25 cm x 25 cm (e. g. Bambu Lab X1C) |
| Enclosure | required (LWASA) |
| Slicer | Bambu Studio (latest version) |
| Filaments used | LW-ASA (e.g. colorFabb), PLA, PLA-CF (e.g. colorFabb) |
| Filament diameter | 1,75 mm |
| Nozzle diameter | 0,40 mm |
Special printing recommendations LW-ASA
Most of the components of the jets sold here are designed and optimized for stable, lightweight construction using LW-ASA. Since this foaming filament requires specific parameters for successful printing, which vary from printer to printer and slicer to slicer, you should conduct your own test prints beforehand. You can find many tutorials and tips on this topic online and on YouTube.
The basic default settings we use with a Bambu Lab X1C and Bambu Studio as slicers are listed here.
You can start with that for now.
| Print bed temperature | 90° Celsius |
| Nozzle temperature | 250° Celsius |
| Cooling | No (max. 10%) |
| Print speed | 35 mm/s |
| Layer height | 0,20 mm |
| Support | Yes (Tree), under 40% inclination |
| Flow rate | 50% – 55% |
| Filling pattern | Gyroid (3D) |
| Filling level | 3% – 5% |
| Retract | Without |
| Number of outer layers | 1-2 |
| Printing plate adhesion | Brim, 8 Linien (Bambu Golden PEI Plate) |